Would you like to learn how to bind a quilt using a serger double fold bias binder? If yes, then keep reading! Although I’ve found several videos and articles about the double fold bias binder and its potential as a tool, the internet seems to be lacking in resources about actual projects made using this attachment. So I thought I would try to fill the gaps by sharing my experiences using the attachment on some of my projects.
The project featured in this post is my recently designed and completed Watermelon Patio Table Topper Quilt. It’s basically a christmas tree skirt with a summer twist! The opening in the quilt fits around my patio table umbrella. The topper adds a little fun to my outdoor summer dining. In the future I hope to create an actual pattern for my design, but for now I will share with you how I used the serger double fold bias binder attachment to finish the curved edges of the quilt
Traditional Double Fold Bias Tape
I love the look of traditional bias bound edges, but I am not always excited about applying folded bias tape using traditional methods. If you use pre-folded bias tape and just slide it over the edge of your project and stitch it down, you risk not catching it on the back side. Or you do catch the back side, but your stitches waver because you didn’t catch the bias tape evenly. And pre-made folded bias tape isn’t available in many colors or prints, so often it is hard to find one that matches your project. Sometimes I do make my own double fold bias tape to coordinate with a project, but I don’t enjoy spending all that time at my ironing board pressing the folds into my bias fabric strips.
Serger Applied Double Fold Bias Binding
Now that I’ve experienced using the double fold bias binder for my serger, I’m in love! The serger double fold bias binder attachment folds your bias fabric and attaches it all in one step, saving you time and giving you professional results. To use this attachment you need to make your own bias fabric strips. This does take a little time, but opens up so many creative possibilities because you are not limited to what is available commercially.
Getting Ready to Bind a Quilt with a Serger Double Fold Bias Binder
Things you need to get started:
- Serger, capable of chain stitch or cover stitch
- Double fold bias binder attachment and attaching screws
- Bias cut fabric strip
- Quilt or project to bind
Things I’ve Learned About the Serger Double Fold Bias Binder
- Practice. You will be guiding the project with your left hand and the bias fabric strip with your right. Grab some scraps and begin with straight edges. Once you’ve mastered the straight edge, experiment with some curves.
- Test your binder alignment and settings before jumping into the project. It’s no fun if you have to readjust after you start applying binding to your actual project.
- Make sure you keep your project raw edge positioned against the folder. If it migrates away, you may not catch it in the binding.
- Don’t be afraid to modify the width of your bias fabric strips slightly to achieve better results. I found that I had better results with 1½” bias strips on my project instead of the recommended 1⅜”.
- You may need to change your needle positions for better results with the chain stitch. I found that using the left needle C1 worked much better for me than the right needle C3.
- Tweezers are very useful at getting the bias fabric strip into the attachment and under the presser foot.
- Make more bias fabric strips than you think you will need. That way you are ready if you have to do a lot of testing or make a mistake. If you have extra left over, you can always use it on another project or for more testing.
- The fewer seams in your bias fabric strip, the better. The extra bulk in the seams can sometimes cause little fluctuations in your stitching.
- You can’t miter corners with this method of applying binding. You must serge on at the beginning and serge off the end of each edge.
Full Tutorial and Video on How to use the Serger Double Fold Bias Binder
If you want all the details on how to use the serger double fold bias binder to bind a quilt or other project click on the link to read my full tutorial at:
I also created a video on how to use a serger double fold bias binder in case you prefer to watch the tool in action. Click on the link below to watch my bias binder video.
Other Examples of Projects with Serger Binding
The serger double fold bias binder attachment is not just for binding quilts. I’ve used it on other projects such as aprons. The aprons below were bound using my serger and the double fold bias binder.
Jen’s Basic Serger Bound Apron – Isn’t this apron cute?! The binding, the ties and the flower on this apron were all done with this tool. Learn how to make this apron in a future project post on my blog.
Festive Holiday Apron – This apron was made from Simplicity pattern 8857. I adapted the instructions slightly so I could use my serger double fold bias binder attachment. All of the red binding on this apron was done with this tool. I was really happy with the results!
Until the Next Project…
I hope you enjoyed this post about how to bind a quilt using serger double fold bias binder. Hope to see you back at my blog soon!
Great video! Would you start the other edge, too, to show what to do with the ends? Thank you
Dawn
Thanks for the feedback! I will definitely include your suggestion when I update the post. I need to take a few more photos on the next project. Unfortunately, I didn’t take any of that step in my original project for this post.
I wonder if this technique will work to make the strap and bind the arm of the pillowcase style dress/dress a girl Africa.
Yes, I think it would work well. If you look at the denim apron photo in my blog post, you will see that I bound the front top edge first. Then I bound the side edges and made the straps with a continuous piece of binding. I’ll give it a try and maybe write a post about it. Thanks!